Описание
The board-to-board connector disconnection failure caused by poor contact is often caused by corrosion of the connector end, external dirt entering the terminal or connecting to the socket, thereby causing a decrease in contact pressure. At this point, just remove the board-to-board connector and re-install it to change its connection and return it to normal contact.Electrical
Current Rating:0.5A
Voltage Rating:50V AC/DC
Contact Resistance:50milliohm Max
Insulation Resistance:100Megohm Min
Operation Temperature:-20°C to +105°C
Housing Material:PA9T+30%G.F(UL94V-0)
Contact Material:Phosphor Btonze
Contact plating:Au or Sn over Ni
